Varnished hardwood flooring is easy to maintain by regularly removing dust and dirt, cleaning with a moderately damp cloth and a suitable cleaner, and periodically caring for the protective varnish coating. Avoid excessive water, harsh cleaners, and mechanical damage.
Recommended products:
Varnished parquet is protected by a durable film-forming coating that shields the natural wood from dirt and daily wear and tear. To preserve its beautiful appearance and the protective properties of the varnish over time, it is important to clean the floor regularly and treat it periodically with appropriate products.
For daily care, it is sufficient to remove dust, sand, and other solid particles with a vacuum cleaner, a soft brush, or a mop. More stubborn stains can be cleaned with a slightly damp microfiber cloth.
For wet cleaning, we recommend Parquet Cleaner—suitable for the regular care of varnished wood floors. Always use the cleaner according to the dosage instructions and do not use too much water.
Sand, salt, small pebbles, and other abrasive particles should be removed promptly, as they can gradually scratch the protective coating when walked on. High-quality doormats at entrances significantly reduce the amount of dirt that reaches the hardwood floor.
In addition to regular cleaning, the lacquer finish also requires periodic care.
Parquet Care Eco is used for this purpose. The product is designed for initial treatment and ongoing maintenance of varnished surfaces, including matte varnish and B-Protect, and is used undiluted.
Parquet Care Eco is applied to a thoroughly cleaned surface using a suitable microfiber cloth, spreading it in a thin, even layer. Regular use helps maintain a uniform appearance and protect the lacquer finish.
The frequency of maintenance depends on the room’s traffic. Hallways, kitchens, entryways, and other heavily used areas may naturally require more frequent care.
With prolonged use of maintenance products on the hardwood floor, buildup from old protective layers and dirt can gradually form.
In such cases, deep cleaning with Intensive Cleaner is performed. The product can also be used on stubborn stains that cannot be removed through regular cleaning.
After removing the old buildup, apply a thin, even layer of Parquet Care Eco to the clean surface, after which you can resume normal maintenance of the hardwood floor.
It is recommended that Intensive Cleaner be used by a professional.
Natural hardwood floors should not be heavily wetted, even though the surface is protected with varnish.
When cleaning, use a well-wrung mop or a slightly damp microfiber cloth. Do not allow puddles to form or water to remain on the surface for extended periods.
If water, beverages, or other liquids are spilled, wipe them up immediately. Prolonged moisture penetration can cause swelling and changes in the natural wood.
The use of wet vacuum cleaners and pressure washers is not recommended.
Do not use all-purpose or harsh cleaning products on varnished hardwood floors.
Particularly unsuitable are products containing:
ammonia, wax, bleaching agents, acids, abrasive components, or unsuitable acrylic coatings.
These can damage the protective coating and alter the appearance of the parquet.
It is especially important not to use all-purpose cleaners containing ammonia.
Place felt pads under the legs of chairs, tables, and other movable furniture. Check them periodically and replace them if they become worn or accumulate debris.
Heavy furniture should not be be dragged directly across the hardwood floor.
For office chairs, soft-coated casters and a suitable transparent protective mat on the floor are recommended. The casters themselves should also be cleaned regularly.
Thin, hard heels can create an extremely high point load and may also damage the surface.
Pets’ claws can scratch the lacquered surface. Keeping their claws trimmed to an appropriate length helps significantly reduce the risk of mechanical marks on the parquet.
Natural wood gradually changes its hue when exposed to light. Areas constantly exposed to direct sunlight may change color more quickly than the rest of the room.
If you use rugs or mats, it’s recommended that you periodically rearrange them. This allows different parts of the hardwood floor to be exposed more evenly to natural light.
If, after the parquet has been installed, finishing work continues in the room, the flooring must be protected with a suitable breathable material, such as corrugated cardboard.
Do not cover the parquet for extended periods with plastic sheeting or other non-breathable materials.
The protective sheets must be secured to one another; tape or other self-adhesive tape must never be applied directly to the parquet.
Hardwood flooring is a natural wood product and reacts to changes in temperature and humidity.
To maintain optimal conditions, the following approximate values are recommended:
Especially during the winter months, heating can significantly dry out the air. If necessary, using a humidifier helps maintain a more stable environment for the natural wood.
Small gaps between individual planks may appear during the heating season; this is part of the wood’s natural reaction to changes in humidity.
Underfloor heating is fully compatible with suitable multi-layer hardwood flooring, but the temperature must be adjusted gradually.
The surface temperature beneath the hardwood flooring must never exceed 27°C.
Avoid sudden changes in temperature in the heating system. In the event of a sudden drop or rise in temperature, use other heating or cooling methods instead of sharply increasing or decreasing the floor temperature.
With underfloor heating, it is also recommended to avoid very thick carpets and furniture with a solid, closed underside covering a large area, as they can impede normal heat transfer from the floor.
For deeper scratches or significant wear, do not use random products for spot repairs.
The condition of the lacquer finish must be professionally assessed to determine whether spot repair, renewal of the protective coating, or more extensive renovation is necessary.
Proper maintenance of lacquered hardwood flooring can be broken down into three basic steps:
Parquet Cleaner for regular cleaning, Parquet Care Eco for periodic maintenance of the protective surface, and Intensive Cleaner for professional deep cleaning when necessary.
In combination with moderate use of water, a suitable climate, and good protection against sand and mechanical damage, this care routine allows natural hardwood floors to retain their beautiful and uniform appearance for a long time.
]] >
Recommended Products:
Oiled hardwood flooring preserves the natural feel and structure of the wood to the greatest extent possible. The oil penetrates the surface layer of the wood, impregnates it, and protects it from wear and dirt without creating a thick film like varnish. This is precisely why proper and periodic maintenance is important for preserving the protection and natural appearance of the hardwood floor.
Daily care begins with regularly removing dust, sand, and other solid particles using a vacuum cleaner, a soft brush, or a mop.
For heavily soiled areas, use a slightly damp microfiber cloth, without saturating the surface with water. You can add Parquet Cleaner to clean water; this product is suitable for regular cleaning of both oiled and varnished parquet.
It is especially important to remove sand and other abrasive particles promptly. When walked on, they act as a abrasive and can gradually wear down the wood’s protective surface. Using high-quality doormats at exterior entrances significantly reduces the amount of such debris getting onto the parquet floor.
Mop Care is recommended for periodic care of oiled hardwood floors.
This is a concentrated maintenance product containing jojoba oil that is added to clean water. It is suitable for both periodic maintenance and for cleaning lightly soiled oiled floors.
For standard use, Mop Care is added at a concentration of about 1% to water.
How often it should be used depends on the traffic on the hardwood floor and the condition of the surface. Areas such as hallways, kitchens, entrances, or areas with heavier foot traffic typically require more frequent care.
Wash and Care is a highly effective concentrated formula with natural ingredients, designed for cleaning and maintaining oily wooden surfaces.
It is available as a concentrate and should be used in accordance with the product’s dosing instructions. It is a suitable choice for regular care when effective cleaning is needed without using harsh cleaners that can compromise the wood’s oil-based protection.
One of the most important features of oiled hardwood flooring is the ability to renew its protection over time.
With more intensive use, when the wood begins to look drier, paler, or visibly worn in certain areas, the surface can be restored with Maintenance Oil.
Before application, the parquet must be thoroughly cleaned.
Maintenance Oil is applied with a flat microfiber mop in a thin, even layer. After application, the surface must be allowed to dry for approximately 4–6 hours. During this process, do not wiped with rags.
The frequency depends on the actual wear and tear on the parquet; as a guideline, such maintenance is recommended approximately once every 12 months, as needed.
Maintenance Oil is a fast-drying, VOC-free product designed for the initial treatment and subsequent maintenance of suitable oiled surfaces.
You don’t need to wait until the wood looks heavily worn.
Maintenance is recommended when:
Restoring the oil layer in a timely manner is significantly easier than renovating wood that is already heavily worn.
To refresh suitable oiled surfaces, you can use Liquid Wax Refresher—a liquid wax designed to restore and refresh the appearance of hardwood floors.
The product must be used in accordance with its intended purpose and the instructions for the specific surface.
When standard cleaning is no longer sufficient or there is old dirt and buildup on the hardwood floor, deep cleaning can be performed using Intensive Cleaner.
First, remove loose dirt. Then apply the Intensive Cleaner to the surface and let it sit for a few minutes. For professional deep cleaning, use a single-disc machine with a white pad to dissolve and remove the accumulated dirt.
Next:
It is recommended that this type of deep cleaning be performed by professionals.
One of the advantages of oiled hardwood floors is that certain localized marks can be corrected more easily compared to film-forming coatings.
For dark woods or colored oiled floors , appropriately selected OSMO colored oils can be used. The right shade can darken a light scratch and significantly reduce its visibility.
For deeper or larger damage, it is recommended that a professional perform the repair to avoid differences in color and texture in the treated area.
Rags and other textile materials soaked in drying vegetable oils may pose a risk of spontaneous combustion.
Used, oil-soaked rags must either:
Only after they have dried completely may they be disposed of with regular trash.
Oiled hardwood flooring is made of natural wood and should not be soaked with water.
When cleaning, use a well-wrung-out mop or a slightly damp microfiber cloth. Spilled water, beverages, and other liquids must be blotted up immediately.
The combination of water and sand is particularly harmful because the moisture affects the wood, while the sand causes mechanical wear.
Water vacuums and pressure washers are not recommended. Excessive amounts of water can cause the wood to swell.
Do not use all-purpose or harsh cleaning products on natural hardwood floors.
The following should be avoided:
It is especially important never to use all-purpose cleaners containing ammonia.
Using an unsuitable degreasing product can remove or weaken the protective oil and leave the wood vulnerable to dirt.
Use high-quality felt pads under the legs of chairs, tables, and other furniture.
Check them periodically and replace them when worn. Sand particles accumulated on the felt can also cause scratches.
For office chairs, we recommend soft-coated casters and a suitable transparent protective pad. The casters should be cleaned regularly.
Heavy furniture should not be dragged directly across the hardwood floor.
Thin, hard heels also create very high point loads and can leave mechanical marks on the wood.
Pets’ long nails can scratch the surface of natural hardwood flooring. Regular nail trimming is one of the -easy preventive measures against such marks.
Wood naturally changes color when exposed to light.
Areas that receive prolonged direct sunlight may change color more quickly than other parts of the room. Whenever possible, limiting constant direct sunlight helps the hardwood flooring age more evenly.
It is advisable to periodically reposition rugs and mats to avoid visible color differences between covered and uncovered areas.
If construction or finishing work continues after installation, the hardwood flooring must be protected with a suitable, breathable covering, such as corrugated cardboard.
Do not use plastic sheeting or other non-breathable materials for long-term coverage.
Individual protective sheets must be secured to one another; tape or other self-adhesive tape must not be applied directly to the hardwood flooring.
Oiling does not alter the natural character of the wood. The parquet continues to absorb and release moisture according to the conditions in the room.
For stable conditions, the following are generally recommended:
Heating can dry out the air significantly, especially in the winter. If necessary, using a humidifier helps maintain a suitable indoor climate.
With natural wood, minimal shrinkage, expansion, and the appearance of small gaps during the heating season are normal occurrences.
With underfloor heating, the temperature should be adjusted gradually, rather than through sudden increases or decreases.
In the event of sudden changes in outdoor temperature, it is recommended to regulate comfort using other heating or cooling methods instead of abruptly changing the underfloor heating temperature.
The surface temperature beneath the hardwood floor should never exceed 27°C.
With heated and cooled floors, avoid very thick carpets and furniture with solid bases covering large areas. They restrict normal heat exchange and can create local variations in the temperature and humidity of the wood.
The main advantage of oiled parquet is that its protection can be renewed throughout its entire service life.
Regular care follows a clear sequence:
Parquet Cleaner for standard cleaning → Mop Care or Wash and Care for periodic care → Maintenance Oil when the oil protection needs to be restored → Intensive Cleaner when professional deep cleaning is required.
For dark or colored oiled floors, the appropriate OSMO colored oils can also help with localized light scratches.
With proper cleaning, timely renewal of the oil protection, and a suitable climate, oiled hardwood flooring retains its natural texture, color depth, and the characteristic feel of real wood for a long time.
]] > Intended Use: an excellent choice for decking and exterior cladding, particularly suitable for projects with a low environmental impact.